21 Sanyo Dr. Wodonga

02 6056 9068

Aeroflow Performance

Aeroflow Fuel Systems

 

Carburettor Adapters Female

Carburettor Adapters Female

AN
Blue
Black
Silver
Holley (7/8"-20)
-6 AF160-06-1 AF160-06-1BLK AF160-06-1S
-8 AF160-08-1 AF160-08-1BLK AF160-08-1S
Barry Grant / Demon (9/16"-24)
-6 AF161-06-1 AF161-06-1BLK AF161-06-1S
-8 AF161-08-1 AF161-08-1BLK AF161-08-1S

 

Carburettor Adapters Male

Carburettor Adapters Male

Size
Blue
Black
Silver
Holley Inlet Feed
3/8" barb to 7/8"-20 AF700-01 AF700-01BLK AF700-01S
1/2" barb to 7/8"-20 AF700-02 AF700-02BLK AF700-02S
-6an to 7/8"-20 (short) AF700-06 AF700-06BLK AF700-06S
-6an to 7/8"-20 (long) AF700-06-L AF700-06-LBLK AF700-06-LS
-8an to 7/8"-20 AF700-08 AF700-08BLK AF700-08S
Demon/Holley Inlet Feed
-6an to 9/16"-24 (short) AF701-06 AF701-06BLK AF701-06S
-8an to 9/16"-24 AF701-08 AF701-08BLK AF701-08S
-6an to 9/16"-24 (long) AF701-06-L AF701-06-LBLK AF701-06-LS
Quadrajet Inlet Feed
-6an to 1"-20 AF708-06 AF708-06BLK AF708-06S
Edelbrock / Carter
Male -6 to 5/8"-20 AF706-06 AF706-06BLK AF706-06S
Note: Sold in pairs, includes washers

 

Adjustable Billet Fuel Logs

Adjustable Billet Fuel Logs

Aeroflow's fuel log features ball and socket assemblies the swivel +/- 20 degrees allowing additional clearance for throttle stops, nitrous plates and other accessories. The telescopic log will fit 4150 style carburettors, 4500 series Dominator and Barry Grant carburettors. The fuel log has one AN flare plug and a male -8AN flare fitting supplied for front or rear entry setup.


Blue
Black
Silver
AF64-2037 AF64-2037BLK AF64-2037S
Note: Comes with fittings to suit bothe Holley & BG carburettors.

 

Carburettor Inlet Rail Kits

Carburettor Inlet Rail Kits

Size
Blue / Red
Black
Silver
Holley Dual Fuel Line
-6an AF160-06 AF160-06BLK AF160-06S
-8an (241mm) 4150 AF160-08 AF160-08BLK AF160-08S
3310 Vac AF160-08V AF160-08VBLK AF160-08VS
Holley Dominator Fuel Line
-8an AF162-08 AF162-08BLK AF162-08S
Holley Ultra HP Aluminium Series Fuel Line
-8an AF165-08 AF165-08BLK AF165-08S
Barry Grant / Demon Dual Fuel Line
-6an AF161-06 AF161-06BLK AF161-06S
-8an AF161-08 AF161-08BLK AF161-08S
Note: -8an rails suit dual metering blocks only.

 

Billet Carb Fuel Pressure Regulators

Billet Carb Fuel Pressure Regulators

Machined from billet 6061-T6 aluminium and anodised, E85 & alcohol compatible. Fast Response, low maintenance. Precise pressure control. -10 feed and 1/8" NPT gauge port on all models. Adjustable base pressure (4-12psi) 2 port model rated to 750HP and 4 port is rated to 1600HP.


Ports
Blue
Black
Polished
2 x -6 ORB AF66-2047 AF66-2047BLK AF66-2047P
4 x -6 ORB AF66-2048 AF66-2048BLK AF66-2048P

 

Billet Fuel Pressure Regulators

Billet Fuel Pressure Regulators

Fully Machined CNC billet and a clear anodised body make Aeroflow's billet fuel pressure regulator a stand out product! It can be used with any fuel pump fro turbo/supercharged, injected or carburetted. All have M12 x 1.5mm female threads. Fittings are supplied with the regulator and include a 1/8" NPT female port. If not running a gauge purchase a 1/8" NPT plug separately.


Part No
Description
AF66-2038-6 -6 high pressure injection
AF66-2038-8 -8 high pressure injection
AF66-2038-9 9mm barb high pressure injection
AF66-2039-6 -6 low pressure carb
AF66-2039-8 -8 low pressure carb
AF66-2039-9 9mm barb low pressure carb
AF59-2038-6 Replacement -6 fittings
AF59-2038-8 Replacement -8 fittings
AF59-2038-9 Replacement 9mm barb fittings
Note: All regulators have M12 x 1.5mm female threads.
Fittings are supplied with regulator and include a 1/8"
female port. If not running a gauge purchase an NPT
plug separately.

 

Carb Fuel Pumps & Regulator

Carb Fuel Pumps & Regulator

Part No
Description
AF49-1008 Red fuel pump, 7psi 97gph (12-801)
AF49-1009 Blue fuel pump, 14psi 110gph (12-802)
AF49-1010 Black fuel pump, 140gph (12-815)
AF49-1011 Blue regulator, 4.5-9psi, 1 in 2 x out (12-803)
Note: All have 3/8" NPT female thread.
AF49-1018 Fuel pump repair kit

 

EFI Fuel Pumps

EFI Fuel Pumps

Part No
Description
AF49-1012 In-tank pump, 255 LPH, inlet screen & harness, 500hp
AF49-1013 In-tank pump, screened, 550hp
AF49-1014 In-tank / external pump, 650hp
AF49-1015 In-tank / external pump, 550hp

 

EFI Fuel Pump Silencer

EFI Fuel Pump Silencer

This solid mounted rubber silencer can be used with externally mounted Aeroflow & Bosch EFI fuel pumps for noise reduction.


Part No
Description
AF49-1019 Fuel pump silencer kit.

 

Fuel pump Brackets

Fuel pump Brackets

These alloy fuel pump brackets are designed to fit Aeroflow & Bosch EFI pumps. The single brackets feature dual rubber inserts to suit both 52mm and 60mm diameter pumps. The dual bracket suits the larger 60mm pumps only.
 
Pumps
Blue
Red
Black
Silver
Replacement mounting rubber & bolts
Single AF64-2000 AF64-2000R AF64-2000BLK AF64-2000S AF59-2000
Dual AF64-2015 AF64-2015R AF64-2015BLK AF64-2015S AF59-2015

 

EFI Fuel Pump Check Valves

EFI Fuel Pump Check Valves

This CNC'd check valve screws directly into Aeroflow or Bosch EFI fuel pumps to hold line pressure and extend the life of the pump.


AN
Blue
Black
Silver
-6 (M12x 1.5) AF615-06 AF615-06BLK AF615-06S
-8 (M12 x 1.5) AF615-08 AF615-08BLK AF615-08S

 

Billet Fuel Pressure Regulators

Billet Fuel Pressure Regulators

Fully Machined CNC billet and a clear anodised body make Aeroflow's billet fuel pressure regulator a stand out product! It can be used with any fuel pump fro turbo/supercharged, injected or carburetted. All have M12 x 1.5mm female threads. Fittings are supplied with the regulator and include a 1/8" NPT female port. If not running a gauge purchase a 1/8" NPT plug separately.


Part No
Description
AF66-2038-6 -6 high pressure injection
AF66-2038-8 -8 high pressure injection
AF66-2038-9 9mm barb high pressure injection
AF66-2039-6 -6 low pressure carb
AF66-2039-8 -8 low pressure carb
AF66-2039-9 9mm barb low pressure carb
AF59-2038-6 Replacement -6 fittings
AF59-2038-8 Replacement -8 fittings
AF59-2038-9 Replacement 9mm barb fittings
Note: All regulators have M12 x 1.5mm female threads.
Fittings are supplied with regulator and include a 1/8"
female port. If not running a gauge purchase an NPT
plug separately.

 

Metric to Barb Adapters

Metric to Barb Adapters

Metric to Barb
Blue
Black
Silver
M10 x 1 to 5/16" AF745-01 AF745-01BLK AF745-01S
M10 x 1 to 3/8" AF745-02 AF745-02BLK AF745-02S
M12 x 1.5 to 5/16" AF731-01 AF731-01BLK AF731-01S
M12 x 1.5 to 3/8" AF731-02 AF731-02BLK AF731-02S
M14 x 1.5 to 5/16" AF746-01 AF746-01BLK AF746-01S
M14 x 1.5 to 3/8" AF746-02 AF746-02BLK AF746-02S
M14 x 1.5 to 1/2" AF746-03 AF746-03BLK AF746-03S
M14 x 1.5 to 5/8" AF746-04 AF746-04BLK AF746-04S
M18 x 1.5 to 1/2" AF734-01 AF734-01BLK AF734-01S
M18 x 1.5 to 3/4" AF734-02 AF734-02BLK AF734-02S

 

AN EFI Fuel Pump Adapters

AN EFI Fuel Pump Adapters

Thread
AN
Blue
Black
Silver
Inlet Fittings
M14 x 1.5mm -6 AF732-06    
M14 x 1.5mm -8 AF732-08    
M14 x 1.5mm -10 AF732-10    
M18 x 1.5mm -6 AF734-06    
M18 x 1.5mm -8 AF734-08    
M18 x 1.5mm -10 AF734-10    
Outlet Fittings
M12 x 1.5mm -6 AF731-06    
M12 x 1.5mm -8 AF731-08  

 

Push-on EFI Fuel Fittings

Push-on EFI Fuel Fittings

These push-on EFI fittings suit LT1, LT4, LS1, Audi, Nissan, VW, Commodore and more. (Pressure side)


Part No
Description
Colour
AF808-01 5/16" return side Blue
AF808-01BLK 5/16" return side Black
AF808-01S 5/16" return side Silver
AF808-02 3/8" hose pressure side Blue
AF808-02BLK 3/8" hose pressure side Black
AF808-02S 3/8" hose pressure side Silver
AF808-03 LS & LT 3/8" hose to -8an Blue
AF808-03BLK LS & LT 3/8" hose to -8an Black
AF808-03S LS & LT 3/8" hose to -8an Silver
AF817-01 -6 push-on to 5/16" male hard tube Blue
AF817-01BLK -6 push-on to 5/16" male hard tube Black
AF817-01S -6 push-on to 5/16" male hard tube Silver
AF817-02 -6 push-on to 3/8" male hard tube Blue
AF817-02BLK -6 push-on to 3/8" male hard tube Black
AF817-02S -6 push-on to 3/8" male hard tube Silver
AF817-03 -8 push-on to 3/8" male hard tube Blue
AF817-03BLK -8 push-on to 3/8" male hard tube Black
AF817-03S -8 push-on to 3/8" male hard tube Silver

 

Injector Insert Adapter

Injector Insert Adapter

Part No
Description
AF889 Injector adapter 11mm to 14mm 6 piece pack

 

Billet Throttle Bodies

Billet Throttle Bodies

Aeroflow's billet throttle bodies are to suit the four bolt LS manifolds and allows the use of your factory TPS and idle control units. The 102mm version requires theuse of an adapter plate or aftermarket manifold.


Size
Aluminium
Black
90mm AF64-2069 AF64-2069BLK
102mm AF64-2070 AF64-2070BLK
Universal Weld-on Flange
AF64-2087 Suits 4 bolt LS throttle bodies  

 

Billet 4 Barrel Throttle Bodies

Billet 4 Barrel Throttle Bodies

Aeroflow's throttle bodies are a true cnc'd billet construction. The 1000cfm throttle bodies utilize a dual pattern flange (4150 & 4500) and incorporate the idle air control valve (IAC) and throttle postion sensor (TPS). The 1.75" bore is designed with a special radius which promotes maximum airflow and minimum turbulence.


Flange
Aluminium
Black
4150 / 4500 AF64-2014 AF64-2014BLK

 

Fuel Rail Extrusion

Fuel Rail Extrusion

Part No
Description
AF64-2003 Fuel rail extrusion, 1 metre (41/64" 16.1mm bore)

 

Fuel Rail Adapters

Fuel Rail Adapters

Aeroflow's precision machined rail adapters allow the use of aftermarket adjustable fuel pressure regulators with your factory fuel rails. All adapters have a 1/8" female port.
 
Blue
Red
Black
Silver
Ford BA, BF, FG, XR6, Territory
AF64-2062 AF64-2062R AF64-2062BLK AF64-2062-RAW
Mazda RX-7, Toyota MR2, Celica GT4
AF64-2063 AF64-2063R AF64-2063BLK AF64-2063-RAW
Subaru, Nissan, Mazda, 32.5mm centres
AF64-2064 AF64-2064R AF64-2064BLK AF64-2064-RAW
Toyota, Subaru, 40mm centres
AF64-2065 AF64-2065R AF64-2065BLK AF64-2065-RAW
Mitsubishi 16mm seal & 37-40mm centres
AF64-2066 AF64-2066R AF64-2066BLK AF64-2066-RAW
Subaru Sti EJ25 2008-on
AF64-2067 AF64-2067R AF64-2067BLK AF64-2067-RAW
Mitsubishi EVO 10, 40mm centres
AF64-2068 AF64-2068R AF64-2068BLK AF64-2068-RAW

 

Ford EFI Regulator Adapters

Ford EFI Regulator Adapters

AN
Shank
Blue
Black
Silver
-6 .435" AF64-4356 AF64-4356BLK AF64-4356S
-6 .550" AF64-5506 AF64-5506BLK AF64-5506S
-8 .550" AF64-5508 AF64-5508BLK AF64-5508S

 

Billet EFI Fuel Rails

Billet EFI Fuel Rails

Aeroflow's billet EFI fuel rails feature precision machining with heavy duty mounts for high pressure applications. Aeroflow fuel rails are threaded with a -8 ORB port and have a 16.1mm / 41/64" size bore. Aeroflow fuel rails are double anodised and are available in blue, black, red & polished finishes.

Suits
Blue
Red
Black
Polished
Silver
Holden / Chevy
LS1 AF64-2005 AF64-2005R AF64-2005BLK AF64-2005P AF64-2005S
LS2 AF64-2006 AF64-2006R AF64-2006BLK AF64-2006P  
LS3 AF64-2007 AF64-2007R AF64-2007BLK AF64-2007P  
304-355 AF64-2008 AF64-2008R AF64-2008BLK AF64-2008P  
Ford
BA-BF AF64-2004 AF64-2004R AF64-2004BLK AF64-2004P  
Windsor AF64-2077 AF64-2077R AF64-2077BLK AF64-2077P  
Mazda
13B (4&5) AF64-2013 AF64-2013R AF64-2013BLK AF64-2013P  
Mitsubishi
4G63 / EVO AF64-2078 AF64-2078R AF64-2078BLK AF64-2078P  
Nissan
SR20 Red AF64-2009 AF64-2009R AF64-2009BLK AF64-2009P  
RB25 AF64-2010 AF64-2010R AF64-2010BLK AF64-2010P  
RB26 AF64-2011 AF64-2011R AF64-2011BLK AF64-2011P  
RB30 AF64-2012 AF64-2012R AF64-2012BLK AF64-2012P  
Subaru
EJ20 AF64-2058 AF64-2058R AF64-2058BLK AF64-2058P  
EJ25 AF64-2057 AF64-2057R AF64-2058BLK AF64-2057P  
Toyota
2JZ AF64-2059 AF64-2059R AF64-2059BLK AF64-2059P  
Note: 2JZ suits 14mm injectors only.

 

Dual EFI Pump Surge Tank Kits

The 3.1L surge tank has 6 x -8 ORB ports for multi configuration. The kit contains a surge tank, dual EFI fuel pump mounting bracket, 2 check valves and a billet y-block (2 x -8, 1 x -10 ORB), Robotically TIG welded, all tanks are professionally polished. Also available black anodised inside and out for use with alcohol and ethanol. ORB ports for easy fitment and positive seal.

Part No
Colour
Size - L x W x H
Litres
AF77-2044 Polished 5" x 5" x 8.25" (127mm x 127mm x 210mm 3.1L
AF77-2044BLK Black 5" x 5" x 8.25" (127mm x 127mm x 210mm 3.1L

 

90° Fuel Pump Banjo Kit

Part NoDescription
AF49-1020 Banjo and bolt kit to suit Aeroflow and Bosch EFI fuel pumps. For use with factory one way valve on pump.