21 Sanyo Dr. Wodonga

02 6056 9068

STAUFF


STAUFF Corporation Pty Ltd (Australia) was established in 1977, and has since grown significantly in both size and scope of products and services to become one of Australia's principal players in the Fluid Power industry and related markets.

STAUFF Clamps

Clamping systems for pipes, tubes, hoses, cables and components; custom-designed special clamps

In most industrial countries STAUFF Clamps symbolise quick and easy pipe and hose installations as well as a clean distinct pipe layout.

The vibration and noise reducing features are appreciated as being an important contribution to environmental protection.

STAUFF Clamps applications are almost unlimited. Due to the extraordinary wide product range, all areas of pipe, tube and hose installation are covered:

  • Industrial Hydraulics
  • Mobile Hydraulics
  • Marine Hydraulics
  • Offshore
  • General Industrial Pipe Construction
  • Mining Industry
  • Nuclear Reactor Construction
  • Instrumentation and Control Technology
  • Pneumatics
 

STAUFF Test

Measuring systems for monitoring, control and venting of fluid and gaseous pressure test systems; sampling of fluid and gaseous media

STAUFF TEST stands for a varied spectrum of screw-in test points and test couplings for tube fittings, which are oriented to international standards and therefore guaranteed to comply with the requirements of applications all over the world.

The extensive range of accessories, including measuring hoses and pressure gauges (mechanical and digital/ electronic) means that the initial test points fitted onto machines and service kits with measuring instruments can be obtained from a single source.

All products are subject to our in-house quality management in accordance with EN lSO 9001:2000. This ensures a consistently high standard of quality.

The following approvals are also available for special versions of the SKK test points:

  • approved for military use as gas filling valve for nitrogen accumulators by the German Bundeswehr Wehrtechnische Dienststelle für Pionier- und Truppengerät (WTD41)
  • DVGW registration as a test point for gas pressure control systems, issued by the German Association of Gas and Water Industries (DVGW)
 

Filtration Technology

Filter Systems for the initial and subsequent equipment of mobile and industrial hydraulic applications; wide range of replacement filter elements

TAUFF Filtration Technology offers a complete range of filtration products and services that will provide the system designer or user with the highest level of contamination control demanded by today's most sophisticated applications. Products include pressure filters, return line filters, elements, spin-on filters, suction strainers and filler breathers for various hydraulic, lubrication and fuel oils.

STAUFF has the technical expertise to provide superior filter element designs for the STAUFF original filter housings and also for the interchange element market. STAUFF manufactures more than 10,000 different elements. Many of these are designed to fit into filter housings produced by other companies while maintaining or surpassing the original performance.

 

Offline Oil Maintenance


CJC™ fine filters, separators and desorbers for removal of particles and water from oil and other fluids

CJC™ Fine Filters

CJC™ Fine Filters are oil filtration units with integrated circulating pumps for off-line installation. The filters are recognised around the world as highly efficient oil maintenance systems for applications involving hydraulic oil, lubrication oil, gear oil, quenching oil, phosphate esters and more. CJC™ Fine Filters are ideal for controlling oil contamination levels for particles, water and degradation products (oxidation resin/sludge, varnish).

CJC™ Filter Separators

CJC™ Filter Separators combine fine filtration with water separation all in one unit, with an integrated circulating pump. They are designed for use in applications containing hydraulic oil, diesel fuel, lubrication oil, etc., in which water ingress is a constant or recurrent problem. CJC™ Filter Separators remove water by coalescence and at the same time minimise oil contamination levels of particles and oil degradation products (oxidation resin/sludge, varnish).

CJC™ Desorbers

CJC™ Desorbers are patented products designed to remove water from oil types which either bind and emulsify water or are high viscosity oil (up to ISO VG 1000). CJC™ Desorbers are ideal for use in applications in which water ingress is a continuous and significant problem, whether for lubrication oil, gear oil or hydraulic oil.

 

Hydraulic Accessories

Wide range of components for the construction of hydraulic tanks, reservoirs and power units for the mobile and industrial hydraulic industry

The STAUFF hydraulic accessories programme has been carefully designed to offer a range of components suited to the demands of building hydraulic systems in most industrial and mobile applications. Whether you require simple filler breathers or precise electrical level switches, flow control valves or complete filter units; the STAUFF accessories range should provide you with the choice you need.

 

Accumulators

Products for regulating the performance of hydraulic systems

STAUFF accumulators provide a means of regulating the performance of a hydraulic system. They are suitable for storing energy under pressure, absorbing hydraulic shock, dampening pump pulsation and flow fluctuations. Bladder or diaphragm accumulators provide excellent gas and fluid separation ensuring dependable performance, maximum efficiency, and long service life.

Why use an Accumulator?
  • Improves your system efficiency
  • Accepted world wide
  • Supplements your pump flow
  • High/ low temperature tolerance
  • Supplies extra power in an emergency
  • Extremely safe (cannot be disassembled under pressure)
  • Compensates for any system leakage
  • Quick response
  • Absorbs hydraulic shocks
  • Wide range of compounds for a variety of fluids
 

Ball Valves

High-pressure 2-way, 3-way and 4-way ball valves and accessories for a variety of mobile and industrial applications all Valves from Stauff are available in a variety of configurations and a range of sizes to suit most hydraulic applications. Ball Valves are a simple method of controlling flow by a means of a ported ball supported on seals in a special housing.

Applications:
  • Industrial, Mobile and Marine hydraulics
  • Mining
  • Gas
  • Paint and lacquer
  • Foam

 

Diagtronics

Components and services for the monitoring and analysis of hydraulic fluids for the mobile and industrial hydraulic industry

STAUFF Filtration Technology offers a complete range of filtration products and services that will provide the system designer or user with the highest level of contamination control demanded by today's most sophisticated applications. Products include pressure filters, return line filters, elements, spin-on filters, suction strainers and filler breathers for various hydraulic, lubrication and fuel oils.

STAUFF has the technical expertise to provide superior filter element designs for the STAUFF original filter housings and also for the interchange element market. STAUFF manufactures more than 10,000 different elements. Many of these are designed to fit into filter housings produced by other companies while maintaining or surpassing the original performance.

 

 

Outset Catalogues

Stauff Products